LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Power Control System) >> Removal And Installation >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Removal and Installation of IPDM E/R >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation of IPDM E/R: Removal

WARNING: This page is about a different car, the 2011 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Remove IPDM E/R upper cover.
    Fig 1: Identifying IPDM E/R Upper Cover
    G04904362Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Release 2 clips and pull IPDM E/R up from case.
  4. Disconnect IPDM E/R connectors and remove the IPDM E/R.
    Fig 2: Locating Clips On IPDM E/R
    G04937975Courtesy of NISSAN MOTOR CO., U.S.A.