LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Brake Control System (With VDC)) >> DTC/Circuit Diagnosis >> Brake Warning Lamp >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK BRAKE WARNING LAMP FUNCTION (1)

    Check that brake warning lamp in combination meter turns ON for approx. 1 second after ignition switch is turned ON.

    CAUTION: Never start engine.

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Proceed to , "DIAGNOSIS PROCEDURE ".

  2. CHECK BRAKE WARNING LAMP FUNCTION (2)

    Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated.

    NOTE: Brake warning lamp turns ON when parking brake is operated (when parking brake switch is ON).

    Is the inspection result normal? 

    YES: GO TO 3.

    NO: Check parking brake switch system. Refer to , "DIAGNOSIS PROCEDURE ".

  3. CHECK BRAKE WARNING LAMP FUNCTION (3)

    Check that brake warning lamp in combination meter turns ON/OFF when brake fluid level switch is operated while brake fluid level in reservoir tank is with the specified level.

    NOTE: Brake warning lamp turns ON when brake fluid is less than the specified level (when brake fluid level switch is ON).

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Check brake fluid level switch system. Refer to , "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals