LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Brake Control System (With VDC)) >> DTC/Circuit Diagnosis >> DTC C1105, C1106, C1107, C1108: Wheel Sensor >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION CONDITION AND POSSIBLE CAUSES

DTC Display Item Malfunction detected condition Possible causes
C1105 RR RH SENSOR-2
  • When a short circuit is detected in rear RH wheel sensor circuit.
  • When power supply voltage of rear RH wheel sensor is in following state.
    • Rear RH wheel sensor power supply voltage: 7.5 V ≥ Rear RH wheel sensor power supply voltage
    • Rear RH wheel sensor power supply voltage: 16 V ≤ Rear RH wheel sensor power supply voltage
  • When distance between rear RH wheel sensor and rear RH wheel sensor rotor is large.
  • When installation of rear RH wheel sensor or rear RH wheel sensor rotor is not normal.
  • Harness or connector
  • Wheel sensor
  • ABS actuator and electric unit (control unit)
  • Sensor rotor
  • Tire
C1106 RR LH SENSOR-2
  • When a short circuit is detected in rear LH wheel sensor circuit.
  • When power supply voltage of rear LH wheel sensor is in following state.
    • Rear LH wheel sensor power supply voltage: 7.5 V ≥ Rear LH wheel sensor power supply voltage
    • Rear LH wheel sensor power supply voltage: 16 V ≤ Rear LH wheel sensor power supply voltage
  • When distance between rear LH wheel sensor and rear LH wheel sensor rotor is large.
  • When installation of rear LH wheel sensor or rear LH wheel sensor rotor is not normal.
C1107 FR RH SENSOR-2
  • When a short circuit is detected in front RH wheel sensor circuit.
  • When power supply voltage of front RH wheel sensor is in following state.
    • Front RH wheel sensor power supply voltage: 7.5 V ≥ Front RH wheel sensor power supply voltage
    • Front RH wheel sensor power supply voltage: 16 V ≤ Front RH wheel sensor power supply voltage
  • When distance between front RH wheel sensor and front RH wheel sensor rotor is large.
  • When installation of front RH wheel sensor or front RH wheel sensor rotor is not normal.
C1108 FR LH SENSOR-2
  • When a short circuit is detected in front LH wheel sensor circuit.
  • When power supply voltage of front LH wheel sensor is in following state.
    • Front LH wheel sensor power supply voltage: 7.5 V ≥ Front LH wheel sensor power supply voltage
    • Front LH wheel sensor power supply voltage: 16 V ≤ Front LH wheel sensor power supply voltage
  • When distance between front LH wheel sensor and front LH wheel sensor rotor is large.
  • When installation of front LH wheel sensor or front LH wheel sensor rotor is not normal.
scientia non olet · About LEMON Manuals