DTC Confirmation Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO 2.
CHECK DTC DETECTION
With CONSULT-III.
1. Start the engine.
2. Drive the vehicle at approx. 30 km/h (19 MPH) or more for approx. 1 minute.
3. Stop the vehicle.
4. Perform self-diagnosis for "ABS".
  Is DTC "C1115" detected?
  
  YES: Proceed to , "DIAGNOSIS PROCEDURE ".
  
  NO: INSPECTION END