Component Inspection

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

CHECK STOP LAMP SWITCH

Turn the ignition switch OFF.
Disconnect stop lamp switch harness connector.

Check continuity when stop lamp switch is operated.

STOP LAMP SWITCH CONTINUITY CHART

Stop lamp switch	Condition	Continuity
Terminal	Condition	Continuity
1 - 2	When stop lamp switch is released (When brake pedal is depressed)	Existed
1 - 2	When stop lamp switch is pressed (When brake pedal is released)	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace stop lamp switch. Refer to "REMOVAL AND INSTALLATION ".