DTC Confirmation Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO 2.
CHECK DTC DETECTION
With CONSULT-III.
1. Turn the ignition switch OFF, and wait 10 seconds or more.
2. Start the engine.
  CAUTION: Never start the vehicle.
3. Depress the brake pedal several times.
4. Perform self-diagnosis for "ABS".
  Is DTC "C1116" detected?
  
  YES: Proceed to , "DIAGNOSIS PROCEDURE ".
  
  NO: INSPECTION END