LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Brake Control System (With VDC)) >> DTC/Circuit Diagnosis >> VDC Off Switch >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK VDC OFF SWITCH
    1. Turn the ignition switch OFF.
    2. Disconnect triple switch harness connector.
    3. Check continuity between terminals of VDC OFF switch connector.
      VDC OFF SWITCH HARNESS CONNECTOR CONTINUITY CHART

      VDC OFF switch Condition Continuity
      Terminal
      1 - 2 When VDC OFF switch is pressed Existed
      When VDC OFF switch is not pressed Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace VDC OFF switch. Refer to , "REMOVAL AND INSTALLATION ".