LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Brake Control System (With VDC)) >> Removal And Installation >> Yaw Rate/Side/DECEL G Sensor >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Never drop or strike yaw rate/side/decel G sensor, because it has little endurance to impact. Never use a pneumatic tool.
  1. Remove front seat (right side). Refer to "REMOVAL AND INSTALLATION ".
  2. Remove floor carpet. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect yaw rate/side/decel G sensor harness connector.
  4. Remove yaw rate/side/decel G sensor.
scientia non olet · About LEMON Manuals