LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Brake Control System (With VDC)) >> System Description >> Component Parts >> Component Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Description

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT REFERENCE CHART

Component Reference/Function
ABS actuator and electric unit (control unit) , "ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) "
Wheel sensor , "WHEEL SENSOR AND SENSOR ROTOR "
Stop lamp switch , "STOP LAMP SWITCH "
Brake pedal position switch , "BRAKE PEDAL POSITION SWITCH "
Steering angle sensor , "STEERING ANGLE SENSOR "
Yaw rate/side/decel G sensor , "YAW RATE/SIDE/DECEL G SENSOR "
VDC OFF switch , "VDC OFF SWITCH "
Brake fluid level switch , "BRAKE FLUID LEVEL SWITCH "
Parking brake switch , "PARKING BRAKE SWITCH "
VDC warning lamp , "SYSTEM DESCRIPTION "
ABS warning lamp
Brake warning lamp
VDC OFF indicator lamp
ECM Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
  • Accelerator pedal position signal
  • Engine speed signal

    Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.

  • Target throttle position signal
TCM(1) Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
  • N range signal
  • P range signal
  • R range signal
  • Current gear position signal
AWD control module(2) Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
  • Current AWD mode signal
(1) Models with CVT
(2) AWD models