Application Items

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

CONSULT-III can display each diagnostic item using the diagnostic test modes as follows.

DIAGNOSTIC TEST MODES

Mode

Function description

ECU identification

Parts number of ABS actuator and electric unit (control unit) can be read.

Self Diagnostic Result

Self-diagnostic results and freeze frame data can be read and erased quickly.⁽¹⁾

DATA MONITOR

Input/Output data in the ABS actuator and electric unit (control unit) can be read.

ACTIVE TEST

Diagnostic Test Mode in which CONSULT-III drives some actuators apart from the ABS actuator and electric unit (control unit) and also shifts some parameters in a specified range.

Function Test⁽²⁾

This mode can show results of self-diagnosis of ECU with either "OK" or "NG". For engine, more practical tests regarding sensors/switches and/or actuators are available.

Work support

Components can be quickly and accurately adjusted.

⁽¹⁾	The following diagnosis information is erased by erasing.

DTC
Freeze frame data (FFD)

⁽²⁾	Although "Function Test" is selectable, do not use its.