Freeze frame data (FFD)

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

When DTC is detected, a vehicle state shown in the table below is recorded and displayed on CONSULT-III.

CONSULT-III DISPLAY ITEM

Item name	Display item
IGN counter (0 - 39)	The number of times that ignition switch is turned ON after the DTC is detected is displayed. When "0" is displayed: It indicates that the system is presently malfunctioning. When except "0" is displayed: It indicates that system malfunction in the past is detected, but the system is presently normal. NOTE: Each time when ignition switch is turned OFF to ON, numerical number increases in 1 → 2 → 3...38 → 39. When the operation number of times exceeds 39, the number do not increase and "39" is displayed until self-diagnosis is erased.

Item name

Display item

IGN counter (0 - 39)

The number of times that ignition switch is turned ON after the DTC is detected is displayed.

When "0" is displayed: It indicates that the system is presently malfunctioning.
When except "0" is displayed: It indicates that system malfunction in the past is detected, but the system is presently normal.
NOTE: Each time when ignition switch is turned OFF to ON, numerical number increases in 1 → 2 → 3...38 → 39. When the operation number of times exceeds 39, the number do not increase and "39" is displayed until self-diagnosis is erased.