LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 (Steering Control System) >> DTC/Circuit Diagnosis >> DTC C1604: Torque Sensor >> DTC Logic >> DTC Confirmation Procedure >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure: Notes

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. DTC REPRODUCTION PROCEDURE

    With CONSULT-III 

    1. Turn the ignition switch OFF to ON.
    2. Perform "EPS" self-diagnosis.

    Is DTC "C1604" detected? 

    YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

    NO: INSPECTION END