Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CONTINUITY CONTROL SIGNAL CIRCUIT

Turn ignition switch OFF.
Disconnect TEL adapter unit connector.
Check continuity between TEL adapter unit harness connector and ground.

CONTINUITY REFERENCE CHART

TEL adapter unit		Ground	Standard	Continuity
Connector	Terminals
M127	23		3.1 V or less	Existed
	24
	27

Is the inspection result normal?

YES: Replace TEL adapter unit. Refer to "REMOVAL AND INSTALLATION ".

NO: Repair harness or connector.