Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK STEERING SWITCH SIGNAL GROUND CIRCUIT (STEERING SWITCH TO TEL ADAPTER UNIT)
- Turn ignition switch OFF.
- Disconnect TEL adapter unit connector and spiral cable connector.
- Check continuity between TEL adapter unit harness connector and spiral cable harness connector.
CONTINUITY REFERENCE CHARTTEL adapter unit Spiral cable Continuity Connector Terminal Connector Terminal M127 14 M33 33 Existed Is the inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK SPIRAL CABLE
Check spiral cable.
Is the inspection result normal?
YES: GO TO 3.
NO: Replace spiral cable. Refer to "EXPLODED VIEW ".
- CHECK GROUND CIRCUIT
- Connect TEL adapter unit connector.
- Check continuity between TEL adapter unit harness connector and ground.
CONTINUITY REFERENCE CHARTTEL adapter unit Ground Continuity Connector Terminal M127 14 Existed Is the inspection result normal?
YES: GO TO 4.
NO: Replace TEL adapter unit. Refer to "REMOVAL AND INSTALLATION ".
- CHECK STEERING SWITCH
Check steering switch. Refer to "COMPONENT INSPECTION ".
Is the inspection result normal?
YES: INSPECTION END
NO: Replace steering switch. Refer to "EXPLODED VIEW ".