Av Communication System

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).]

Fig 1: Identifying Repaired Area Soldered And Wrapped With Tape

Courtesy of NISSAN MOTOR CO., U.S.A.

Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.)

Fig 2: Precaution For Bypass Wire Connection

Courtesy of NISSAN MOTOR CO., U.S.A.

PREPARATION

Commercial Service Tools

COMMERCIAL SERVICE TOOL DESCRIPTION CHART

Tool name		Description
Power tool	Courtesy of NISSAN MOTOR CO., U.S.A.	Loosening screws