LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Audio, Visual, Navigation System) >> Integrated Control System >> Ecu Diagnosis Information >> Multi Display Unit >> Reference Value >> Values On The Diagnosis Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Values On The Diagnosis Tool

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
ECU DIAGNOSIS INFORMATION REFERENCE CHART

Monitor item Test condition Reference value/Status
ECO SW Ignition switch ON ECO mode On
Other than the above Off
NORMAL SW Ignition switch ON NORMAL mode On
Other than the above Off
SPORTS SW Ignition switch ON SPORT mode On
Other than the above Off
BOOST PRESSURE Ignition switch ON Engine running Values according to boost pressure
ENGINE SPEED
[Tr/min]
Ignition switch ON Engine running Values according to engine speed
ENGINE TORQUE
[Nm]
Ignition switch ON Engine running Values according to engine torque
BATTERY VOLTAGE
[V]
Ignition switch ON - Values according to input voltage
FUEL CONSUMPTION
[mm3 ]
Ignition switch ON Engine running Values according to instantaneous fuel consumption
VEHICLE SPEED [km/h] Ignition switch ON Driving Values according to vehicle speed
LONG ACC [G] Ignition switch ON Driving Values according to decel. G
TRANCE ACC
[G]
Ignition switch ON Driving Values according to side G
DIST TOTAL [km/h] Ignition switch ON - Values according to mileage
POSI LIGHT REQ Ignition switch ON Light SW at 1st or 2nd position On
Light switch OFF Off
CLUSTER ILL REQ Ignition switch ON Block the light beam from the auto light sensor when the light switch is in the 1st position, 2nd position or AUTO position. On
Expose the auto light sensor to light when the light switch is OFF or in the 1st position, 2nd position or AUTO position. Off
ENGINE STATUS Ignition switch ON Engine stop STOP
Engine stall STALL
Engine running RUN
Engine cranking CRA
A/C SW(1) Ignition switch ON Cycles On/Off whenever the A/C switch is pressed. On→Off→On
AUTO SW(1) Ignition switch ON Cycles On/Off whenever the AUTO switch is pressed. On→Off→On
RR DEF SW(1) Ignition switch ON While the rear DEF switch is held down On
Ignition switch ON Other than the above Off
FR DEF SW(1) Ignition switch ON Cycles On/Off whenever the front DEF switch is pressed. On→Off→On
VENT SW1(1) Ignition switch ON Cycles On/Off whenever the VENT, B/L, FOOT, or D/F switch is pressed. On→Off→On
VENT SW2(1) Ignition switch ON Press the VENT switch. VENT
Press the B/L switch. B/L
Press the FOOT switch. FOOT
Press the D/F switch. D/F
INTAKE SW(1) Ignition switch ON Cycles On/Off whenever the intake switch is pressed. On→Off→On
INT SW LONG PUSH(1) Ignition switch ON Cycles On/Off whenever the intake switch is held down. On→Off→On
Off SW(1) Ignition switch ON Cycles On/Off whenever the OFF switch is held down. On→Off→On
TEMP SW1(1) Ignition switch ON Cycles On/Off whenever the temperature control dial is turned clockwise or counterclockwise. On→Off→On
FAN SW1(1) Ignition switch ON Cycles ON/Off whenever the fan control dial is turned clockwise or counterclockwise. On→Off→On
A/C SW IND Ignition switch ON A/C switch indicator ON On
A/C switch indicator OFF Off
A/C INDICATOR Ignition switch ON A/C indicator ON On
A/C indicator OFF Off
Off INDICATOR Ignition switch ON Air conditioner OFF On
Other than the above Off
AIR VENT IND Ignition switch ON Air conditioner OFF Nothing displayed.
VENT mode VENT
B/L mode B/L
FOOT mode FOOT
D/F mode D/F
DEF mode DEF
FR DEF SW IND Ignition switch ON Front DEF switch indicator ON On
Other than the above Off
FRE SW IND Ignition switch ON FRE switch indicator ON On
Other than the above Off
REC SW IND Ignition switch ON REC switch indicator ON On
Other than the above Off
RR DEF SW IND Ignition switch ON Rear DEF switch indicator ON On
Other than the above Off
AUTO IND Ignition switch ON MANUAL mode Off
AUTO mode Auto
TEMP IND [°C] Ignition switch ON - Displays the temperature set by the user.
FAN IND Ignition switch ON Air conditioner OFF Off
Displays a value according to the fan speed. 1 to 7 speed
(1) This is not used to determine ON/OFF of the indicator lamp.