Component Description
WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
INTEGRATED CONTROL SYSTEM UNIT DESCRIPTION CHART
| Unit |
Description |
| Multi display unit |
- A multi display unit integrating a color display and an operation panel is adopted.
- The display indicates the air conditioner operation status, driving mode, information, and setting screen.
- The unit transmits operation signals for air conditioner and drive mode to the respective units via CAN communication.
- It receives the drive mode selection, information display/setting, and necessary information for controlling the air conditioner control functions from the respective units via CAN communication.
|
| Combination meter |
Transmits the following signals to the multi display unit via CAN communication.
- Vehicle speed signal
- Odometer signal
|
| ECM |
- Transmits the following signals to the multi display unit via CAN communication.
- Engine speed signal
- Fuel consumption monitor signal
- Engine status signal
- Engine torque signal
- Boost pressure signal
- Receives the following signals from TCM via CAN communication and changes over the throttle position characteristic (CVT models).
- ECO mode signal
- NORMAL mode signal
- SPORT mode signal
- Receives the following signals from the multi display unit via CAN communication and changes over the throttle position characteristic (M/T models).
- ECO mode signal
- NORMAL mode signal
- SPORT mode signal
|
| BCM |
Transmits the position light request signal to the multi display unit via CAN communication. |
| TCM (CVT models) |
- Receives the following signals from the multi display unit via CAN communication and changes over the gear shift line.
- ECO mode signal
- NORMAL mode signal
- SPORT mode signal
- Transmits the following signals to ECM via CAN communication.
|
| A/C auto amp. |
- Transmits the A/C display signal to the multi display unit via CAN communication.
- Receives the following signals from the multi display unit via CAN communication.
- ECO mode signal
- A/C ECO setting signal
- A/C switch operation signal
|
| EPS control unit |
Receives the following signals from the multi display unit via CAN communication.
- ECO mode signal
- NORMAL mode signal
- SPORT mode signal
|
| ABS actuator and electric unit (control unit) |
Transmits the following signals to the multi display unit via CAN communication.
- Side G sensor signal
- Decel G sensor signal
|