Data Monitor
WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
MULTIDISPLAY UNIT DESCRIPTION CHART
| Monitor item | Unit | Description | ||
|---|---|---|---|---|
| ECO SW | On/Off | Displays the ECO switch signal status sent via CAN communication. | ||
| NORMAL SW | On/Off | Displays the NORMAL switch signal status sent via CAN communication. | ||
| SPORTS SW | On/Off | Displays the SPORTS switch signal status sent via CAN communication. | ||
| BOOST PRESSURE | kPa | Displays the boost pressure signal value received from ECM via CAN communication. | ||
| ENGINE SPEED | Tr/min | Displays the engine speed signal value received from ECM via CAN communication. | ||
| ENGINE TORQUE | Nm | Displays the engine torque signal value received from ECM via CAN communication. | ||
| BATTERY VOLTAGE | V | Displays the input voltage value. | ||
| FUEL CONSUMPTION | mm3 | Displays the fuel consumption signal value received from ECM via CAN communication. | ||
| VEHICLE SPEED | km/h | Displays the vehicle speed signal value received from the combination meter via CAN communication. | ||
| LONG ACC | G | Displays the decel G signal received from ABS actuator and electric unit (control unit) via CAN communication. | ||
| TRANCE ACC | G | Displays the side G signal received from ABS actuator and electric unit (control unit) via CAN communication. | ||
| DIST TOTAL | km | Displays the mileage signal value received from the combination meter via CAN communication. | ||
| POSI LIGHT REQ | On/Off | Displays the parking lamp signal value received from BCM via CAN communication. | ||
| CLUSTER ILL REQ | On/Off | Displays the dimming signal value received from BCM via CAN communication. | ||
| ENGINE STATUS | STOP/STALL/RUN/CRA | Displays the engine status signal value received from ECM via CAN communication. | ||
| A/C SW(1) | On/Off | Displays the A/C switch signal status sent via CAN communication. | ||
| AUTO SW(1) | On/Off | Displays the AUTO switch signal status sent via CAN communication. | ||
| RR DEF SW(1) | On/Off | Displays the RR DEF switch signal status sent via CAN communication. | ||
| FR DEF SW(1) | On/Off | Displays the FR DEF switch signal status sent via CAN communication. | ||
| VENT SW1(1) | On/Off | Displays the air outlet switch signal status sent via CAN communication. | ||
| VENT SW2(1) | VENT/B/L/FOOT/D/F | Displays the air outlet switch signal status sent via CAN communication. | ||
| INTAKE SW(1) | On/Off | Displays the air intake switch signal status sent via CAN communication. | ||
| INTAKE SW LONG PUSH(1) | On/Off | Displays the air intake switch hold signal status sent via CAN communication. | ||
| OFF SW(1) | On/Off | Displays the OFF switch signal status sent via CAN communication. | ||
| TEMP SW1(1) | On/Off | Displays the temperature control dial signal status sent via CAN communication. | ||
| FAN SW1(1) | On/Off | Displays the fan control dial signal status sent via CAN communication. | ||
| A/C SW IND | On/Off | Displays the A/C switch indicator signal value received from the A/C auto amp. via CAN communication. | ||
| A/C INDICATOR | On/Off | Displays the A/C display signal value received from the A/C auto amp. via CAN communication. | ||
| OFF INDICATOR | On/Off | Displays the OFF display signal value received from the A/C auto amp. via CAN communication. | ||
| AIR VENT IND | Non-display/VENT/B/L/FOOT/D/F/DEF | Displays the air outlet indicator signal value received from the A/C auto amp. via CAN communication. | ||
| FR DEF SW IND | On/Off | Displays the RF DEF indicator signal value received from the A/C auto amp. via CAN communication. | ||
| FRE SW IND | On/Off | Displays the FRE indicator signal value received from the A/C auto amp. via CAN communication. | ||
| REC SW IND | On/Off | Displays the REC indicator signal value received from the A/C auto amp. via CAN communication. | ||
| RR DEF SW IND | On/Off | Displays the RR DEF indicator signal value received from the IPDM E/R via CAN communication. | ||
| AUTO IND | Off/Auto | Displays the AUTO indicator signal value received from the A/C auto amp. via CAN communication. | ||
| TEMP IND | °C | Displays the temperature setting unit signal value received from the A/C auto amp. via CAN communication. | ||
| FAN IND | Off/speed | Displays the fan setting signal value received from the A/C auto amp. via CAN communication. | ||
|
||||