LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 265 (Security Control System) >> With Intelligent Key System >> Basic Inspection >> Additional Service When Replacing Control Unit >> BCM >> BCM : Work Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

BCM : Work Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
  1. SAVING VEHICLE SPECIFICATION

    CONSULT-III Configuration

    Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "CONFIGURATION (BCM) : DESCRIPTION ".

    NOTE: If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.

    GO TO 2.

  2. REPLACE BCM

    Replace BCM. Refer to "REMOVAL AND INSTALLATION ".

    GO TO 3.

  3. WRITING VEHICLE SPECIFICATION

    CONSULT-III Configuration

    Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to "CONFIGURATION (BCM) : WORK PROCEDURE ".

    GO TO 4.

  4. INITIALIZE BCM (NATS)

    Perform BCM initialization. (NATS)

    WORK END

scientia non olet · About LEMON Manuals