LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 265 (Security Control System) >> With Intelligent Key System >> Removal And Installation >> Push-Button Ignition Switch >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the NATS antenna amp. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the push-button ignition switch.
    1. Disengage the push-button ignition switch (1) fixing pawls using minus driver etc.
    2. Press the push-button ignition switch to remove it from cluster lid A (2).
      Fig 1: Removing Push-Button Ignition Switch
      G06936242Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals