LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Engine Control System - Component Testing) >> On-Vehicle Repair >> Intake Valve Timing Control >> Intake Valve Timing Control Solenoid Valve (LH) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Valve Timing Control Solenoid Valve (LH): Removal

WARNING: This page is about a different car, the 2011 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine room cover using power tool. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove air duct and resonator assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove drive belt. Refer to "REMOVAL AND INSTALLATION ".
  4. Disconnect Intake valve timing control intake valve timing control solenoid valve connector (LH).
  5. Remove Intake valve timing control solenoid valve (LH) (2) from Intake valve timing control solenoid valve cover (LH) (1).
    Fig 1: Identifying Intake Valve Timing Control Solenoid Valve (LH) And Intake Valve Timing Control Solenoid Valve Cover (LH)
    G05378610Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals