Physical Values
WARNING: This page is about a different car, the 2010 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTOR TERMINAL DESCRIPTION
| Terminal (Wire color) | Description | Condition | Reference value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 6 (Y) | 15 | Steering switch signal A | Input | Ignition switch ON | Press and hold the PWR switch (without Bluetooth) | 0V |
| Press and hold phone operation switch (with Bluetooth). | ||||||
| Press and hold ↑ switch. | 0.75V | |||||
| Press and hold VOL up switch | 2V | |||||
| Except for above. | 5V | |||||
| 7 (V) | Ground | ACC power supply | Input | Ignition switch ACC | - | Battery voltage |
| 9 (R/L) | Ground | Illumination signal | Input | OFF | Lighting switch is OFF. | 0V |
| Lighting switch is ON. | 12V | |||||
| 15 | Ground | Steering switch signal GND | - | Ignition switch ON | - | 0V |
| 16 (BR) | 15 | Steering switch signal B | Input | Ignition switch ON | Press and hold MODE switch (without Bluetooth). | 0V |
| Press and hold POWER and MODE select switch (with Bluetooth). | ||||||
| Press and hold ↓ switch. | 0.75V | |||||
| Press and hold VOL down switch. | 2V | |||||
| Except for above. | 5V | |||||
| 19 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage |
| 20 (B) | Ground | Ground | - | Ignition switch ON | - | 0V |
| 22 (W) | 21 (B) | Satellite radio sound signal LH | Input | Ignition switch ON | When satellite radio mode is selected | |
| 24 (Y) | 23 (BR) | Satellite radio sound signal RH | Input | Ignition switch ON | When satellite radio mode is selected | |
| 25 | - | Shield | - | - | - | - |
| 26 | Ground | Data ground | - | Ignition switch ON | When satellite radio mode is selected | 0V |
| 28 (W) | Ground | Request signal (SAT→CONT) | Input | Ignition switch ON | When satellite radio mode is selected | |
| 29 (R) | Ground | Communication signal (SAT→CONT) | Input | Ignition switch ON | When satellite radio mode is selected | |
| 30 (B) | Ground | Communication signal (CONT→SAT) | Output | Ignition switch ON | When satellite radio mode is selected | |
| 36 (Y) | Ground | AUX image signal | Output | Ignition switch ON | When AUX mode is selected | |
| 37 (L) | Ground | AUX image ground | - | Ignition switch ON | - | 0V |
| 38 (R) | Ground | RGB signal (B: blue) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 39 (B) | Ground | RGB signal (G: green) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 40 (W) | Ground | RGB signal (R: red) | Output | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |
| 41 (W) | Ground | RGB synchronizing signal | Output | Ignition switch ON | - | |
| 42 | - | RGB synchronizing ground | - | Ignition switch ON | - | 0V |
| 43 (O) | Ground | RGB area (YS) signal | Output | Ignition switch ON | RGB image | 5V |
| AUX image | ||||||
| 44 (LG) | Ground | Communication signal (DISP→CONT) | Input | Ignition switch ON | When adjusting display-brightness | |
| 45 (W/L) | Ground | Horizontal synchronizing (HP) signal | Input | Ignition switch ON | - | |
| 46 (G/O) | Ground | Signal ground | - | Ignition switch | - | 0V |
| 47 (B/O) | Ground | Signal VCC | Output | Ignition switch ACC | - | 9V |
| 48 (G) | Ground | Composite out synchronizing signal GND | - | Ignition switch ON | - | 0V |
| 49 | - | Shield | - | - | - | - |
| 50 | Ground | RGB ground | - | Ignition switch ON | - | 0V |
| 54 (B) | Ground | Ground | - | Ignition switch ON | - | 0V |
| 55 | - | Shield | - | - | - | - |
| 56 (V) | Ground | Communication signal (CONT→DISP) | Output | Ignition switch ON | When adjusting display-brightness | |
| 57 (O/L) | Ground | Vertical synchronizing (VP) signal | Input | Ignition switch On | - | |
| 58 (B) | Ground | Inverter ground | - | Ignition switch ON | - | 0V |
| 59 (BR/Y) | Ground | Inverter VCC | Output | Ignition switch ACC | - | 9V |
| 64 (B) | Ground | Rear view camera video signal ground | - | Ignition switch ON | - | 0V |
| 65 (W) | Ground | Rear view camera video in (+) | Input | Ignition switch ON | With rear view camera ON | |
| 66 (B/W) | Ground | DVD player video signal (+) | Input | Ignition switch ON | With DVD player operating | |
| 68 (BR) | Ground | RV_CAM_SIG | - | - | - | - |
| 72 | - | Shield | - | - | - | - |
| 74 (L) | Ground | DVD player video ground | - | Ignition switch ON | - | 0V |
| 77 (W/L) | 76 (O) | Headphone RH audio signal | Output | Ignition switch ON | With DVD player operating | |
| 80 (L) | 79 (P) | TEL voice audio signal | Input | Ignition switch ON | Start confirmation/adjustment mode, and then Voice Microphone Test by selecting "Voice Microphone Test" on Handsfree Microphone screen. | |
| 81 | - | Shield | - | - | - | - |
| 83 (R) | 82 (G) | DVD player audio signal RH | Input | Ignition switch ON | With DVD player operating | |
| 85 (B) | Ground | Ground | - | Ignition switch ON | - | 0V |
| 86 (L) | - | CAN-H | Input/Output | - | - | - |
| 87 (P) | - | CAN-L | Input/Output | - | - | - |
| 88 (W/L) | - | AV communication signal 1 (H) | Input/Output | - | - | - |
| 89 (P/B) | - | AV communication signal 1 (L) | Input/Output | - | - | - |
| 90 (L/W) | - | AV communication signal 2 (H) | Input/Output | - | - | - |
| 91 (B/P) | - | AV communication signal 2 (L) | Input/Output | - | - | - |
| 93 (O/L) | 92 (W) | Headphone LH audio signal | Output | Ignition switch ON | With DVD player operating | |
| 94 | - | Shield | - | - | - | - |
| 95 (B) | 97 (R) | AUX audio signal RH | Input | Ignition switch ON | When AUX mode is selected | |
| 96 (W) | 97 (R) | AUX audio signal LH | Input | Ignition switch ON | When AUX mode is selected | |
| 98 (B) | 99 (W) | DVD player audio signal LH | Input | Ignition switch ON | With DVD player operating | |
| 101 (B) | Ground | A/C and AV switch assembly ground | - | Ignition switch ON | - | 0V |
| 103 (SB) | Ground | CD eject signal | Input | - | Pressing the eject switch | 0V |
| Except for above | 3.3V | |||||
| 104 (G/R) | Ground | Ignition signal | Input | Ignition switch ON | - | Battery voltage |
| 105 (G/W) | Ground | Reverse signal | Input | Ignition switch ON | R position | Battery voltage |
| Other than R position | 0V | |||||
| 106 (G) | Ground | Parking brake signal | Input | Ignition switch ON | Parking brake ON | 0V |
| Parking brake OFF | Battery voltage | |||||
| 107 (W/R) | Ground | Vehicle speed signal (8-pulse) | Input | Ignition switch ON | When vehicle speed is approx. 40 km/h (25MPH) | |
| 108 (W) | 114 (B) | Rear RH pre-amp. sound signal | Output | Ignition switch ON | Audio output | |
| 109 (BR) | 115 (B/R) | Front RH pre-amp. sound signal | Output | Ignition switch ON | Audio output | |
| 110 (GR/L) | Ground | Amp. ON signal | Output | Ignition switch ON | Battery voltage | |
| 111 | - | Shield | - | - | - | - |
| 112 (L) | 118 (B/W) | Rear LH pre-amp. sound signal | Output | Ignition switch ON | Audio output | |
| 113 (LG) | 119 (V) | Front LH pre-amp. sound signal | Output | Ignition switch ON | Audio output | |