Removal and Installation: Removal
WARNING: This page is about a different car, the 2010 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal.
- Slide the front passenger seat fully forward.
- Remove the Bluetooth control unit kick shield screws and remove the Bluetooth control unit kick shield.
- Remove the Bluetooth control unit screws (C), disconnect the Bluetooth control unit connectors and remove the Bluetooth control unit (2).
- Bluetooth antenna (1)
- Bluetooth antenna screws (A)
- Bluetooth antenna connector (B)
- ← :Front of vehicle