LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Power Window Control System) >> Component Diagnosis >> Encoder >> Passenger Side >> PASSENGER SIDE : Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PASSENGER SIDE : Diagnosis Procedure

WARNING: This page is about a different car, the 2010 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".

  1. CHECK ENCODER SIGNAL
    1. Turn ignition switch ON.
    2. Check signal between power window and door lock/unlock switch RH connector and ground with oscilloscope.
      TERMINAL REFERENCE CHART

      Terminals Signal (Reference value)
      (+) (-)
      Power window and door lock/unlock switch RH connector Terminal
      D105 12 Ground Refer to following signal
      15
      Fig 1: Checking Signal Between Power Window And Door Lock/Unlock Switch Rh Connector And Ground
      G05046817Courtesy of NISSAN MOTOR CO., U.S.A.
      Fig 2: Encoder Signal Waveform
      G05046818Courtesy of NISSAN MOTOR CO., U.S.A.

      Is the inspection result normal? 

      YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

      NO: GO TO  2

  2. CHECK FRONT POWER WINDOW MOTOR RH POWER SUPPLY
    1. Disconnect front power window motor RH.
    2. Check voltage between front power window motor RH connector and ground.
      TERMINAL VOLTAGE REFERENCE CHART

      Terminal Voltage (V) (Approx.)
      (+) (-)
      Front power window motor RH connector Terminal
      D105 4 Ground 10

      Is the measurement value within the specification? 

      YES: GO TO  4

      NO: GO TO  3

      Fig 3: Checking Voltage Between Front Power Window Motor RH Connector And Ground
      G04902759Courtesy of NISSAN MOTOR CO., U.S.A.
  3. CHECK HARNESS CONTINUITY 1
    1. Turn ignition switch OFF.
    2. Disconnect power window and door lock/unlock switch RH.
    3. Check continuity between power window and door lock/unlock switch RH connector and front power window motor RH connector.
      TERMINAL CONTINUITY REFERENCE CHART

      Power window and door lock/unlock switch RH connector Terminal Front power window motor RH connector Terminal Continuity
      D105 (A) 4 D104 (B) 4 Yes
    4. Check continuity between power window and door lock/unlock switch RH connector and ground.
      Fig 4: Checking Continuity Between Power Window, Door Lock/Unlock Switch RH Connector And Front Power Window Motor RH Connector
      G05382349Courtesy of NISSAN MOTOR CO., U.S.A.
      TERMINAL CONTINUITY REFERENCE CHART

      Power window and door lock/unlock switch RH connector Terminal Ground Continuity
      D105 (A) 4 No

      Is the inspection result normal? 

      YES: Replace power window and door lock/unlock switch RH. Refer to "REMOVAL AND INSTALLATION ".

      NO: Repair or replace harness.

  4. CHECK GROUND CIRCUIT
    1. Turn ignition switch OFF.
    2. Check continuity between front power window motor RH connector and ground.
      TERMINAL CONTINUITY REFERENCE CHART

      Front power window motor RH connector Terminal Ground Continuity
      D104 6 Yes

      Is the inspection result normal? 

      YES: GO TO  6

      NO: GO TO  5

      Fig 5: Checking Continuity Between Front Power Window Motor RH Connector And Ground
      G04902751Courtesy of NISSAN MOTOR CO., U.S.A.
  5. CHECK HARNESS CONTINUITY 2
    1. Disconnect power window and door lock/unlock switch RH.
    2. Check continuity between power window and door lock/unlock switch RH connector and front power window motor RH connector.
      TERMINAL CONTINUITY REFERENCE CHART

      Power window and door lock/unlock switch RH connector Terminal Front power window motor RH connector Terminal Continuity
      D105 3 D104 6 Yes

      Is the inspection result normal? 

      YES: Replace power window and door lock/unlock switch RH. Refer to "REMOVAL AND INSTALLATION ".

      NO: Repair or replace harness.

      Fig 6: Checking Continuity Between Power Window, Door Lock/Unlock Switch RH Connector And Front Power Window Motor RH Connector
      G04902757Courtesy of NISSAN MOTOR CO., U.S.A.
  6. CHECK HARNESS CONTINUITY 3
    1. Disconnect power window and door lock/unlock switch RH.
    2. Check continuity between power window and door lock/unlock switch RH connector and front power window motor RH connector.
      TERMINAL CONTINUITY REFERENCE CHART

      Power window and door lock/unlock switch RH connector Terminal Front power window motor RH connector Terminal Continuity
      D105 (A) 12 D104 (B) 3 Yes
      15 5
    3. Check continuity between power window and door lock/unlock switch RH connector and ground.
      Fig 7: Checking Continuity Between Power Window, Door Lock/Unlock Switch RH Connector And Front Power Window Motor RH Connector
      G05382352Courtesy of NISSAN MOTOR CO., U.S.A.
      TERMINAL CONTINUITY REFERENCE CHART

      Power window and door lock/unlock switch RH connector Terminal Ground Continuity
      D105 (A) 12 No
      15

      Is the inspection result normal? 

      YES: Replace front power window motor RH. Refer to "REMOVAL AND INSTALLATION ".

      NO: Repair or replace harness.

scientia non olet · About LEMON Manuals