LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Security Control System) >> With Intelligent Key System >> DTC/Circuit Diagnosis >> DTC B2603: Shift Position >> Component Inspection (Transmission Range Switch)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (Transmission Range Switch)

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK TRANSMISSION RANGE SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect transmission range switch connector.
    3. Check continuity between transmission range switch terminals.
      CONNECTOR TERMINALS CONTINUITY REFERENCE CHART

      Transmission range switch Condition Continuity
      Terminal
      1 2 P or N position Existed
      Other than above Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace transmission range switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals