Component Inspection [CVT Shift Selector (Detention Switch)]

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CVT SHIFT SELECTOR (DETENTION SWITCH)

Turn ignition switch OFF.
Disconnect CVT shift selector connector.

Check continuity between CVT shift selector (detention switch) terminals.

CONNECTOR TERMINALS CONTINUITY REFERENCE CHART

CVT shift selector (detention switch)		Condition		Continuity
Terminal		Condition		Continuity
12	13	Selector lever: P position	Selector button: Released	Not existed
		Selector lever: P position	Selector button: Pressed	Existed
		Selector lever: Except P position		Existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace CVT shift selector. Refer to "REMOVAL AND INSTALLATION ".