Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

INSPECTION START
1. Turn ignition switch ON.
2. Select "Self Diagnostic Result" mode of "BCM" using CONSULT-III.
3. Touch "ERASE".
4. Perform DTC CONFIRMATION PROCEDURE for DTC B260F. Refer to , "DTC LOGIC ".
  Is DTC detected?
  
  YES: GO TO 2.
  
  NO: INSPECTION END
REPLACE ECM
Replace ECM.

Refer to "REMOVAL AND INSTALLATION ".

INSPECTION END