DTC Confirmation Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM DTC CONFIRMATION PROCEDURE 1
1. Turn ignition switch ON.
2. Wait 2 seconds or more under the following conditions.
  - Shift lever: In the Neutral position.
  - Clutch pedal: Depressed
3. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT-III.
  Is DTC detected?
  
  YES: Go to , "DIAGNOSIS PROCEDURE ".
  
  NO: GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE 2
1. Release clutch pedal and wait 2 seconds or more.
2. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT-III.
  Is DTC detected?
  
  YES: Go to , "DIAGNOSIS PROCEDURE ".
  
  NO: INSPECTION END