DTC Detection Logic

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If DTC B26FB is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
If DTC B26FB is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".

DTC DETECTION LOGIC CHART

DTC No.	Trouble diagnosis name	DTC detection condition	Possible cause
B26FB	CLUTCH SW	BCM receives the abnormal signal of clutch pedal position switch from ECM via CAN communication.	Harness or connector (CAN communication line is open or shorted) (Clutch pedal position switch circuit is open or shorted.)