Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM INITIALIZATION
Perform initialization of BCM and registration of all ignition keys using CONSULT-III.

For initialization and registration procedures, refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.

Can the system be initialized and can the engine be started with registered ignition key?

YES: INSPECTION END

NO: GO TO 2.
REPLACE IGNITION KEY
1. Replace ignition key.
2. Perform initialization of BCM and registration of all ignition keys using CONSULT-III.
  For initialization and registration procedures, refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.
  
  Can the system be initialized and can the engine be started with registered ignition key?
  
  YES: INSPECTION END
  
  NO: GO TO 3.
REPLACE BCM
1. Replace BCM. Refer to "REMOVAL AND INSTALLATION ".
2. Perform initialization of BCM and registration of all ignition keys using CONSULT-III.
  For initialization and registration procedures, refer to CONSULT-III Operation Manual NATS-IVIS/NVIS.
  
  INSPECTION END