Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ENGINE START FUNCTION
- Perform that DTC except DTC P1610 is not detected.
If detected, erase the DTC after fixing.
- Turn ignition switch OFF.
- Turn ignition switch ON using the registered ignition key and wait for 5 seconds.
- Turn the ignition switch OFF and wait 5 seconds.
- Repeat steps 4 and 5 twice (a total of 3 times).
- Check that engine can start using the registered ignition key.
INSPECTION END
- Perform that DTC except DTC P1610 is not detected.