THEFT ALM : CONSULT-III Function (BCM - THEFT)
WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
WORK SUPPORT
WORK SUPPORT REFERENCE CHART
| Service Item | Description |
|---|---|
| SECURITY ALARM SET | This mode is able to confirm and change security alarm ON-OFF setting. |
| THEFT ALM TRG | The switch which triggered vehicle security alarm is recorded. This mode is able to confirm and erase the record of vehicle security alarm. The trigger data can be erased by touching "CLEAR" on CONSULT-III screen. |
ACTIVE TEST
ACTIVE TEST REFERENCE CHART
| Test Item | Description |
|---|---|
| THEFT IND | This test is able to check security indicator lamp operation. Security indicator lamp will be turned on when "ON" on CONSULT-III screen is touched. |
| VEHICLE SECURITY HORN | This test is able to check horn operation. Horn will be activated for 0.5 seconds after "ON" on CONSULT-III screen is touched. |
| HEADLAMP (HI) | This test is able to check headlamp (HI) operation. Headlamps (HI) will be activated for 0.5 seconds after "ON" on CONSULT-III screen is touched. |
| FLASHER | This test is able to check hazard warning lamp operation. Hazard warning lamps will be activated after "LH" or "RH" on CONSULT-III screen is touched. |