LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Security Control System) >> Without Intelligent Key System >> System Description >> Diagnosis System (IPDM E/R) >> CONSULT-III Function (IPDM E/R) >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

Monitor item 

DATA MONITOR CHART

Monitor Item [Unit] MAIN SIGNALS Description
RAD FAN REQ [%] x Displays the value of the cooling fan speed request signal received from ECM via CAN communication.
AC COMP REQ [Off/On] x Displays the status of the A/C compressor request signal received from ECM via CAN communication.
TAIL&CLR REQ [Off/On] x Displays the status of the position light request signal received from BCM via CAN communication.
HL LO REQ [Off/On] x Displays the status of the low beam request signal received from BCM via CAN communication.
HL HI REQ [Off/On] x Displays the status of the high beam request signal received from BCM via CAN communication.
FR FOG REQ [Off/On] x Displays the status of the front fog light request signal received from BCM via CAN communication.
FR WIP REQ [Stop/1LOW/Low/Hi] x Displays the status of the front wiper request signal received from BCM via CAN communication.
WIP AUTO STOP [STOP P/ACT P] x Displays the status of the front wiper auto stop signal judged by IPDM E/R.
WIP PROT [Off/BLOCK] x Displays the status of the front wiper fail-safe operation judged by IPDM E/R.
IGN RLY [Off/On] x Displays the status of the ignition relay judged by IPDM E/R.
INTER/NP SW [Off/On] x Displays the status of the shift position (CVT models) judged by IPDM E/R.
ST RLY REQ [Off/On] x Displays the status of the starter relay status signal received from BCM via CAN communication.
DTRL REQ [Off/On] x Displays the status of the daytime running light request signal received from BCM via CAN communication.
OIL P SW [Open/Close] x
NOTE: This item is indicated, but not monitored.
HOOD SW [Off/On] x
NOTE: This item is indicated, but not monitored.
HL WASHER REQ [Off/On] x
NOTE: This item is indicated, but not monitored.
THFT HRN REQ [Off/On] x Displays the status of the theft warning horn request signal received from BCM via CAN communication.
HORN CHIRP [Off/On] x Displays the status of the horn reminder request signal received from BCM via CAN communication.