DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press the push-button ignition switch under the following conditions, and wait for 1 second or more.
CVT models
- Selector lever is in the P or N position
- Do not depress brake pedal
M/T models
- Do not depress clutch pedal
- Check "Self-diagnosis result" of BCM with CONSULT-III.
Is DTC detected?
YES: Go to , "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Press the push-button ignition switch under the following conditions, and wait for 1 second or more.