LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Engine Control System (MR16DDT) - Juke - Component & System Checks, Symptom Diagnosis, Periodic Maintenance, Removal And Installation, Service Data And Specifications (SDS)) >> Component & System Checks >> Clutch Pedal Position Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FOR CLUTCH PEDAL POSITION SWITCH FUNCTION
    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector and ground.
    TERMINAL VOLTAGE REFERENCE CHART

    ECM Condition Voltage (Approx.)
    Connector + -
    Terminal
    E18 108 127 Clutch pedal Slightly depressed Battery voltage
    Fully released 0V

    Is the inspection result normal? 

    YES: INSPECTION END.

    NO: Proceed to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals