LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> G37 Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Security Control System (With Intelligent Key System)) >> On-Vehicle Repair >> Remote Keyless Entry Receiver >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the front pillar upper finisher (RH). Refer to "COMPONENT ".
  3. Remove the side ventilator grille (RH). Refer to "EXPLODED VIEW ".
  4. Remove the instrument side finisher. Refer to "EXPLODED VIEW ".
  5. Remove the upper glove box. Refer to "EXPLODED VIEW ".
  6. Remove the bolt (A), disconnect the harness connector (1) and remove the remote keyless entry receiver (2).
    Fig 1: Identifying Bolt, Harness Connector And Remote Keyless Entry Receiver
    G05930015Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals