Inspection Procedure
- CHECK SELF-DIAGNOSIS RESULTS
Check self-diagnosis results.
SELF-DIAGNOSIS RESULTS REFERENCESelf-diagnosis results ENGINE SIGNAL 1 ENGINE SIGNAL 2 ENGINE SIGNAL 3 ENGINE SIGNAL 4 ENGINE SIGNAL 6 Is above displayed on the self-diagnosis display?
YES: GO TO 2.
NO: INSPECTION END
- CHECK ENGINE SYSTEM
- Perform ECM self-diagnosis. Repair or replace items indicated, then perform ECM self-diagnosis again. Refer to DIAGNOSIS DESCRIPTION (VQ35HR), TROUBLE DIAGNOSIS (VK45DE).
- Perform ABS actuator and electric unit (control unit) self-diagnosis.
OK or NG
OK: INSPECTION END
NG:
- Repair or replace malfunctioning components.
- Perform the self-diagnosis, and make sure that the result shows "NO DTC IS DETECTED".