Component Inspection

CHECK ASCD STEERING SWITCH

Check resistance between combination switch (spiral cable) harness connector terminals under the following conditions.

Fig 1: Checking Continuity Between Combination Switch Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

TERMINAL RESISTANCE CHART

Combination switch (spiral cable)		Condition	Resistance (Ω)
Connector	Terminals	Condition	Resistance (Ω)
M303	18 and 21	MAIN switch: Pressed	Approx. 0
		CANCEL switch: Pressed	Approx. 250
		SET/COAST switch: Pressed	Approx. 660
		RESUME/ACCELERATE switch: Pressed	Approx. 1, 490
		All ASCD steering switches: Released	Approx. 3, 980

Is the inspection result normal?

YES: INSPECTION END

NO: Replace ASCD steering switch