Component Inspection

CHECK EXHAUST VALVE TIMING CONTROL MAGNET RETARDER

Check resistance between exhaust valve timing control magnet retarder terminals as per the following.

TERMINAL RESISTANCE CHART

Terminals	Resistance
1 and 2	9.0 - 11.0 Ω [at 20°C (68°F)]

Is the inspection result normal?

YES: INSPECTION END

NO: GO TO 2.

Fig 1: Checking Resistance Between Exhaust Valve Timing Control Magnet Retarder Terminals 1 And 2

Courtesy of NISSAN MOTOR CO., U.S.A.

REPLACE EXHAUST VALVE TIMING CONTROL MAGNET RETARDER
1. Replace malfunctioning exhaust valve timing control magnet retarder.
2. Perform "EXHAUST VALVE TIMING CONTROL LEARNING : SPECIAL REPAIR REQUIREMENT ".
  INSPECTION END