Torque Specifications
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Camshaft timing oil control valve assembly x Cylinder head | 10 | 102 | 7 |
| VVT sensor x Cylinder head | 8.0 | 82 | 71 in.*lbf |
| Crankshaft position sensor x Cylinder block | 10 | 102 | 7 |
| Engine coolant temperature sensor x Rear water bypass joint | 20 | 204 | 15 |
| Throttle body x Intake manifold | 11 | 112 | 9 |
| No. 1 Water outlet pipe x Cylinder block | 10 | 102 | 7 |
| Knock sensor x Cylinder block | 20 | 204 | 15 |
| ECM x Body | 8.0 | 82 | 71 in.*lbf |
| Connector holder block x Body | 7.3 | 74 | 65 in.*lbf |
| Accelerator pedal rod assembly x Body | 5.0 | 51 | 44 in.*lbf |
| Air fuel ratio sensor x Front exhaust pipe assembly (for Bank 1 Sensor 1) | 44 (40) | 449 (408) | 32 (30) |
| Air fuel ratio sensor x Front No. 2 exhaust pipe assembly (for Bank 2 Sensor 1) | 44 (40) | 449 (408) | 32 (30) |
| Heated oxygen sensor x Front exhaust pipe assembly (for Bank 1 Sensor 2) | 44 (40) | 449 (408) | 32 (30) |
| Heated oxygen sensor x Front No. 2 exhaust pipe assembly (for Bank 2 Sensor 2) | 44 (40) | 449 (408) | 32 (30) |
(): For use without SST