Diagnosis Procedure
WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONTINUITY CONTROL SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect TEL adapter unit connector.
- Check continuity between TEL adapter unit harness connector terminals 21, 23, 24 and ground.
21, 23, 24 - Ground: Continuity should exist.
Is the inspection result normal?
Yes: Replace TEL adapter unit.
No: Repair harness or connector.