Reference Value
WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
TERMINAL LAYOUT
PHYSICAL VALUES
CONNECTOR TERMINALS REFERENCE TABLE
| Terminal (Wire color) |
Description | Condition | Reference value (Approx.) | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||||||
| 1 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V | ||||
| 2 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage | ||||
| 3 (V) | Ground | ACC power supply | Input | Ignition switch ACC | - | Battery voltage | ||||
| 5 (BR) | Ground | Composite image ground (AUX image)(1) (DVD and AUX images)(2) |
- | Ignition switch ON | - | 0 V | ||||
| 6 (G/R) | Ground | RGB image signal (G: green) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |||||
| 7 (P) | Ground | RGB image signal ground | - | Ignition switch ON | - | 0 V | ||||
| 8 (W) | Ground | Horizontal synchronizing (HP) signal | Output | Ignition switch ON | - | |||||
| 9 (G) | Ground | RGB area (YS) signal | Input | Ignition switch ON | When RGB image is displayed. | 5 V | ||||
| When rear view camera image is displayed. | ||||||||||
| 11 (O/L) | Ground | Communication signal (CONT→DISP) | Input | Ignition switch ON | When adjusting front display brightness. | |||||
| 12 (W) | Ground | Camera image signal | Input | Ignition switch ON | When rear view camera image is displayed. | |||||
| 13 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V | ||||
| 14 | - | Shield | - | - | - | - | ||||
| 15 (B/R) | 5 (BR) | Composite image signal (AUX image signal)(1) (AUX and DVD image)(2) |
Input | Ignition switch ON | When AUX or DVD image is displayed. | |||||
| 17 (G/O) | Ground | RGB image signal (R: red) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |||||
| 18 (G/Y) | Ground | RGB image signal (B: blue) | Input | Ignition switch ON | Start confirmation/adjustment mode, and then display color bar by selecting "Color Spectrum Bar" on DISPLAY DIAGNOSIS screen. | |||||
| 19 (L) | Ground | RGB synchronizing signal | Input | Ignition switch ON | - | |||||
| 20 (R) | Ground | Vertical synchronizing (VP) signal | Output | Ignition switch ON | - | |||||
| 21 (B) | Ground | RGB synchronizing signal ground | - | Ignition switch ON | - | 0 V | ||||
| 22 (W/L) | Ground | Communication signal (DISP→CONT) | Output | Ignition switch ON | When adjusting front display brightness. | |||||
|
||||||||||