LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Engine Control System - Introduction) >> Service Information >> Trouble Diagnosis >> CONSULT-III Function >> Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CONSULT-III Function: Function

WARNING: This page is about a different car, the 2010 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
FUNCTION CHART

Diagnostic test mode Function
ECU Identification ECM part number can be read.
Self Diagnostic Result Self-diagnostic results such as 1st trip DTC, DTCs and 1st trip freeze frame data or freeze frame data can be read and erased quickly.(1)
Data Monitor Input/Output data in the ECM can be read.
Active Test Diagnostic Test Mode in which CONSULT-III drives some actuators apart from the ECMs and also shifts some parameters in a specified range.
Function Test This mode is used to inform customers when the vehicle requires periodic maintenance.
Work Support This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT-III unit.
DTC & SRT Confirmation The status of system monitoring tests and the self-diagnosis status/results can be confirmed.
(1) The following emission-related diagnostic information is cleared when the ECM memory is erased.
scientia non olet · About LEMON Manuals