DTC C1101: RR RH Sensor-1: Notes

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

After using the CONSULT-III SELF-DIAG RESULTS to determine the location of the malfunctioning wheel sensor, check all areas to determine the component to be replaced.

CAUTION:

Do not measure the resistance value and also voltage between sensor terminal with tester etc., because sensor is an active sensor.
Do not expand terminal of connector with a tester terminal stick, when it does the inspection with tester.