LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M35 x >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Body, Lock & Security System >> Service Information >> Intelligent Key System >> Check Ignition Switch Position
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Ignition Switch Position

  1. CHECK IGNITION POWER SUPPLY

    Check voltage between Intelligent Key unit connector and ground.

    VOLTAGE REFERENCE CHART

    Terminals Ignition switch position
    (+) (-)
    Intelligent Key unit connector Terminal OFF ACC ON
    M32 30 Ground 0 Battery voltage Battery voltage
    31 0 0 Battery voltage
    Fig 1: Checking Voltage Between Intelligent Key Unit Connector And Ground
    G05212261Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Ignition power supply is OK.

    NG: Check the following.

    • Repair or replace Intelligent Key unit power supply circuit.
    • Check 10A fuse [No. 6, located in the fuse block (J/B)]
    • Check 10A fuse [No. 12, located in the fuse block (J/B)]
scientia non olet · About LEMON Manuals