Detailed Flow

Check the malfunction symptoms by performing the following items.

• Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred).
• Check the symptom.

Is the occurred symptom malfunction? 

YES: GO TO 2.

NO: INSPECTION END

1. Connect CONSULT-III and perform a self-diagnosis for "MULTI AV".

   Refer to "WITHOUT NAVIGATION : CONSULT-III FUNCTION (MULTI AV) ". (without navigation)

   Refer to "WITH NAVIGATION : CONSULT-III FUNCTION (MULTI AV) ". (with navigation)

   NOTE: Skip to step 4 of the diagnosis procedure if "MULTI AV" is not displayed.
2. Check if any DTC is displayed in the self-diagnosis results.

Is DTC displayed? 

YES: GO TO 3.

NO: GO TO  4.

1. Check the DTC indicated in the self-diagnosis results.
2. Perform the relevant diagnosis referring to the DTC Index.

Refer to "WITHOUT NAVIGATION : DTC INDEX ". (without navigation)

Refer to "WITH NAVIGATION : DTC INDEX ". (with navigation)

GO TO  5.

Perform the relevant diagnosis referring to the diagnosis chart by symptom.

Refer to "WITHOUT NAVIGATION : SYMPTOM TABLE ". (without navigation)

Refer to "WITH NAVIGATION : SYMPTOM TABLE ". (with navigation)

GO TO 5.

1. Repair or replace the identified malfunctioning parts.
2. Perform a self-diagnosis for "MULTI AV" with CONSULT-III.
   NOTE: Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC has been indicated in the self-diagnosis results.
3. Check that the symptom does not occur.

Does the symptom occur? 

YES: GO TO 1.

NO: INSPECTION END