LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M35 x >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission - Circuit Testing, Overhaul, Disassembly & Assembly (5AT: Re5R05A) >> Shift Control System >> Adjustment of A/T Position >> 2WD Models
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2WD Models

  1. Loosen nut (2) of pivot pin (1).
  2. Place PNP switch and selector lever in "P" position.
  3. While pressing lower lever (3) toward rear of vehicle (in "P" position direction), tighten nut to specified torque. Refer to CONTROL ROD REMOVAL AND INSTALLATION .
    Fig 1: Identifying Nut, Pivot Pin And Lower Lever (2WD Models)
    G05213344Courtesy of NISSAN MOTOR CO., U.S.A.