LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M35 x >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission - Circuit Testing, Overhaul, Disassembly & Assembly (5AT: Re5R05A) >> Shift Control System >> Adjustment of A/T Position >> AWD Models
April 5, 2026: LEMON Manuals is launched! Read the announcement.

AWD Models

  1. Loosen nut (2) of bracket (1).
  2. Place PNP switch and selector lever in "P" position.
  3. While pressing lower lever (3) toward rear of vehicle (in "P" position direction), tighten nut to specified torque. Refer to CONTROL ROD REMOVAL AND INSTALLATION .
    Fig 1: Identifying Nut, Pivot Pin And Lower Lever (AWD Models)
    G05213345Courtesy of NISSAN MOTOR CO., U.S.A.