Control Device Removal and Installation: Installation

Note the following, and install in the reverse order of removal.

After installation is completed, adjust and check A/T position. Refer to ADJUSTMENT OF A/T POSITION and CHECKING OF A/T POSITION .

Note the following, and install in the reverse order of removal.

NOTE: Bend control device assembly (1) to vehicle, then insert lower lever (2) to the rear of vehicle.

After installation is completed, adjust and check A/T position. Refer to ADJUSTMENT OF A/T POSITION and CHECKING OF A/T POSITION .

Fig 1: Identifying Control Device Assembly And Lower Lever
Courtesy of NISSAN MOTOR CO., U.S.A.