Entry Operation

When the seat is in the exiting position when either condition (1 or 2) is satisfied, the seat returns from exiting position to the previous driving position.

Operation Condition

1. Ignition switch: ON
2. Ignition switch: ACC/Driver side door switch: OFF (CLOSE)

   If the following conditions are not satisfied, entry operation is not performed.

   • Ignition switch is in OFF position.
   • Selector lever position is in P position.
   • Vehicle speed is less than 7 km/h (4 MPH).
   • Driver side power seat switch, ADP steering switch and door mirror control switch are not operated.
   • Seat memory switch and set switch is not operated.
   • Output malfunction is not detected.
   • Detention switch malfunction is not detected.

     [Detention switch malfunction is sensed when detention switch remains OFF and vehicle speed is higher than 7 km/h (4 MPH).]

   • CAN communications are normal.
   • Exiting positions have not been changed during and after exiting operation.